63
En
02
Caution
• When
HDMI
is selected for
Video
, no video signals are output
from the
COMPONENT VIDEO
,
S-VIDEO
or
VIDEO
output
terminals.
• When
Component Video
or
S-Video/Video
is selected for
Video
, no video signals are output from the
HDMI OUT
terminal.
• The video and audio signals output from the set output terminals
are output synchronously (lip synchronization).
• Linear PCM audio signals (2 channels) are output from all
terminals other than the ones selected for
Audio
, regardless of
the audio format or the player’s settings.
5
Select and set the HDMI High-Speed Transmission setting.
Use
/
to select
On
, then press
ENTER
.
• When
HDMI High-Speed Transmission
is set to
Off
, use the
supplied HDMI cable or a High Speed HDMI™ cable. The picture
and sound may not be output properly if any other HDMI cable
(standard HDMI™ cable) is used.
• When
HDMI
is selected for
Video
, proceed to step 8.
• When
Component Video
is selected for
Video
, proceed to
step 6.
• When
S-Video/Video
is selected for
Video
, proceed to step 7.
6
Select the output video resolution from the COMPONENT
VIDEO output terminals.
Use
/
to select, then press
ENTER
.
For details on the resolution settings, see
Switching the output video
resolution
on page 65.
7
Select the aspect ratio of your TV.
Use
/
to select, then press
ENTER
.
8
Check the settings.
Select
Proceed
, then press
ENTER
.
9
Output test tones.
Use
/
to select
Yes
, then press
ENTER
.
Caution
• The screen in step 10 and test tones are output simultaneously
according to the settings in steps 4 to 7. Lower the volume of the
devices connected with the player.
SETUP
TOP MENU
DISC
NAVIGATOR
HOME
MENU
TOOLS
MENU
RETURN
Setup Navigator
BD PLAYER
Select the HDMI Hi-speed transmission setting.
Normally select [On] (Recommended).
Select [Off] if the video or audio of HDMI-connected
was not output in the test output.
On
Off
Setup Navigator
BD PLAYER
Select the output video resolution at the
Component video terminal.
If you select [Source Direct], the output
resolution is determined according to the
video format of the playing source.
Setup Navigator
BD PLAYER
Select the screen aspect ratio to match
your TV.
Setup Navigator
BD PLAYER
Select [Proceed] if you want to start testing
your audio and video settings.
Proceed
Setup Navigator
BD PLAYER
The test tone will be output.
Reduce the volume to an appropriate level.
The video and/or audio may not be output under certain setup.
The setup menu comes back in 30 seconds.
Yes
No
LX01BD_2.book Page 63 Friday, September 5, 2008 11:29 AM
