10
54
En
Specifications
Audio Multi-channel Receiver Subwoofer
HDMI C.ERR 1**
Check if the HDMI cable is properly connected. If the cable is properly connected, this unit may be damaged.
In such an event, please contact a Pioneer-authorized service center or your nearest dealer.
Noisy!
Background noise is too high to complete MCACC setup successfully.
Error MIC!
An error occurred during MCACC setup because the microphone is not connected or is not connected properly.
Error Speaker!
An error occurred during MCACC setup because the speakers are not connected or are not connected properly.
Over Temp
Try lowering the volume. If this problem is not fixed by removing and inserting the power cable, this unit may
be damaged. In such an event, please contact a Pioneer-authorized service center or your nearest dealer.
OC Error1
OC Error2
Check whether the speaker cables are short-circuited. If the error message continues to be displayed, contact
your Pioneer authorized service center or your dealer for servicing.
*** BackUpERR
Contact your Pioneer authorized service center or your dealer for servicing.
Message
Description
Model
SX-LX70SW
Rated voltage
AC 220 V to 240 V
Rated frequency
50 Hz/60 Hz
Power consumption
69 W
Power consumption (standby)
0.39 W (HDMI Control ON)
0.29 W (HDMI Control OFF)
Weight
17.8 kg
External dimensions (including projecting parts)
245 mm (W) x 409 mm (H) x 600 mm (D)
Tolerable operating temperature
+5 °C to +35 °C
Tolerable operating humidity
5 % to 85 % (no condensation)
Amplifier section:
RMS Power Output
(8 channel output)
Front, Center, Surround (6 channel)
50 W per channel (1 kHz, 10 % T.H.D., 8
Ω
)
Dual Subwoofer (2 channel)
100 W (50 W+ 50 W) (100 Hz, 10 % T.H.D., 8
Ω
)
FM tuner section
Frequency range
87.5 MHz to 108 MHz
Antenna
75
Ω
, unbalanced
AM tuner section
Frequency range
531 kHz to 1602 kHz
Antenna
Loop antenna
Subwoofer section
Enclosure
Bass-reflex floor type (magnetically shielded)
System
18 cm 1-way system
Speaker
18 cm cone type x2
Nominal impedance
8
Ω
Frequency range
30 Hz to 500 Hz
Maximum Input Power
50 W x2
Input/Output section
HDMI terminal
Input
19 pin x3
Output
19 pin (5 V, 100 mA)
Other connector
System connector
26 pin
Audio input
Optical x2 (Digital)
RCA (2 pin) (Analog)
Control output
Mini jack x2
Display unit
System connector
26 pin
Front Audio input
Mini jack
MCACC input
Mini jack
iPod input
20 pin (12 V, 420 mA)
LX01BD_1.book Page 54 Tuesday, September 2, 2008 12:33 PM
