14
Part names
3.
MASTER 2 terminals (RCA)
Connect to analog input terminals on a power amplifier, etc.
•
Use the [
MASTER 2
] terminals for unbalanced input (RCA, etc.).
4.
BOOTH terminals (1/4”/6.35 mm, TRS)
Connect a booth monitor.
•
Use the terminals for balanced output only. Connecting the terminals to unbalanced
inputs results in unwanted noises and/or poor sound quality.
5.
USB ports
Connect a PC/Mac.
6.
CH 2 terminals
7.
LINE/PHONO selector switch
Set to [
LINE
] when you connect a DJ player or line-level output device to the [
CH 1
]/[
CH
2
] terminals, and set to [
PHONO
] when you connect a turntable or phono-level (MM
cartridge) output device to the terminals.
8.
Signal GND terminal
Connect a turntable’s ground wire.
Reduces unwanted noises that occur when a turntable is connected to the unit.
9.
CH 1 terminals
10.
AUX terminals
Connect a line-level output device.
11.
MIC 2 terminal (1/4”/6.35 mm, TRS)
12.
ATT. knob
Adjusts the sound level input to the [
MIC 1
] and [
MIC 2
] terminals.
•
Microphone gain varies depending on the microphone you use. Adjust the sound
level according to your microphone before using it.
To adjust the microphone volume during a performance, use the [
LEVEL (MIC 1, MIC
2)
] knobs on the front panel (page 77).
13.
MIC 1 terminal (XLR or 1/4”/6.35 mm, TRS)
14.
button
Turns the unit on (
) and off (
).
15.
DC IN terminal
Connect to a power outlet with the supplied AC adapter and power cord (page 31).
16.
Cord hook
Put the cord of the AC adapter through the hook to fix it to the unit.
