PIONEER DJ SERATO DDJ-REV7 Instruction Manual Download Page 10

Page: 10 / 118

DJ software

The installer closes.



Installation procedure (for Windows)

Do not connect your PC (Windows) to the unit until the installation is complete.
•

You’ll need admin rights to install the software on your PC (Windows).

•

Close all applications running on your PC (Windows) before starting the installation.

1 Unzip the downloaded Serato DJ Pro software file.

2 Double-click the unzipped software file.

The installer launches.

3 Read the License Agreement terms carefully.

If you agree to the terms, select [I agree to the license terms
and conditions] and then click [Install].

•

If you don’t agree to the License Agreement terms, click [

Close

] to cancel the

installation.

The installation completion screen appears when it’s finished.

4 Click [Close].

The installer closes.

Summary of Contents for SERATO DDJ-REV7























































































































Search results

Summary of Contents for SERATO DDJ-REV7

Reviews:

Brands by name

Popular brands

PIONEER DJ SERATO DDJ-REV7, Instruction Manual

Search results

Summary of Contents for SERATO DDJ-REV7

Reviews:

Brands by name

Popular brands