PIONEER DJ SERATO DDJ-REV7 Instruction Manual Download

Page: 89 / 118

Beat FX/software effects

HELIX

Records the input sound and outputs the recorded sound
repeatedly according to the specified beat fraction.

•





Effect time with respect to 1 beat of the BPM (beat fraction):
1/16 to 16 beats

• LEVEL/DEPTH

Ratio of sound overlay

•

You can change the attenuation rate by turning the
[

LEVEL/DEPTH

] knob all the way counterclockwise and

then clockwise. Turn the knob all the way clockwise to fix
the output sound.

• Sub parameter

Speed: 1 to 9

HELIX OUT

Records the input sound and then outputs it repeatedly – like
reverberation – while increasing the playback speed and the
pitch.

•





Effect time with respect to 1 beat of the BPM (beat fraction):
1/16 to 2 beats

• LEVEL/DEPTH

Ratio of sound overlay

•

You can change the attenuation rate by turning the
[

LEVEL/DEPTH

] knob all the way counterclockwise and

then clockwise. Turn the knob all the way clockwise to fix
the output sound.

• Sub parameter

Fade-out time: 1 to 9

DELAY

Outputs a delay sound once according to the beat.

•





Delay time with respect to 1 beat of the BPM (beat fraction): 1/32
to 4 beats

• LEVEL/DEPTH

Balance between the original sound and the effected sound

• Sub parameter

Swing: 1 to 9

Beat FX/operation

Description

Summary of Contents for SERATO DDJ-REV7























































































































Search results

Summary of Contents for SERATO DDJ-REV7

Reviews:

Related manuals for SERATO DDJ-REV7

Brands by name

Popular brands

PIONEER DJ SERATO DDJ-REV7, Instruction Manual

Search results

Summary of Contents for SERATO DDJ-REV7

Reviews:

Related manuals for SERATO DDJ-REV7

Brands by name

Popular brands