Pinnacle LaserPro ZX Series, User Manual

Page: 76 / 123

ZX SERIES USER MANUAL
75
Step 1. Go to LINK/ DLINK function page and stop cursor at Laser2.cdr.
Fig. 5-22 Change job printing sequence
Step 2. Press F4 key to initiate DLINK function and you would find Laser2.cdris removed
from the job queue.
Fig. 5-23 Change job printing sequence
NOTE:
1. The same file can’t print more than once in the same job queue.
2. ZX Series can accept multiple job queues at the same time, each job queue is
independent and unable to link each other.
3. In order to know the printing sequence, the main working page would remind you what
is the next printing job. Find fig. 5-24 for example.
Fig. 5-24 Change job printing sequence
02 is the next file
01| Laser1.cdr |-02|---
*02| Laser2.cdr |-03|-01
03| Laser3.cdr |----|-02
Back Link Dlink
01| Laser1.cdr |-03|---
*02| Laser2.cdr |----|---
03| Laser3.cdr |----|-01
Back Link Dlink
03| Laser3.cdr *02
Speed : 100.0% DPI: 300
Power: 50.0% PPI:762
--- : --- : --- 000/001
Prev Next Z Func “