Pinnacle LaserPro ZX Series, User Manual

Page: 103 / 123

ZX SERIES USER MANUAL
102
„
Relative Move –
The laser will return to the first position of the current job.
„
Center –
The laser will recognize whenever location the lens carriage (the red beam) is
anchored as the center of the to-be-engraved graphic.
Fig. 6-20 Advance Setting
C-3 Image Output Direction
„
Top to Bottom –
The laser would engraver from top to bottom of the image.
„
Bottom To Up –
Normally, the Pinnacle XZ Series engraves from top to bottom, left to right.
Selecting Bottom Up will force the machine to start from the bottom and work its way to the rear
of the working table. Some laminates will produce dust that may get lodged in the engraved area
if the machine engraves from top to bottom. Since the exhaust system is located at the rear of
the machine, the dust will be sucked away from the engraved area.
C-4 Skip White
When Skip White function is enabled, the laser would only engrave the black image and skip the white
area to save time. The skip white enabled is the default setting of ZX Series, user can adjust it to
disable according to applications.
C-5 Border
When Border is selected, the cutting area will be larger, while the border would surround the image.
C-6 Vector Function
„
All Raster Output –
When choose “all raster output” to print graphic including vector line and
raster image, the laser would take the vector line as raster data and print the whole graphics as
raster engraving image.