manualshive.com logo in svg

PINARELLO DOGMA F12 Series, Assembly Manual

The PINARELLO DOGMA F12 Series is a high-performance road bike designed to elevate your cycling experience. To ensure proper assembly and maintenance, we provide a detailed Assembly Manual that you can easily download for free from our website. Get the most out of your bike by following the guided instructions available at manualshive.com.

Share
Download
background image

CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia

C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com

49

The adoption of the adapter modifies the maximum spacer heights allowed. We must 
now take into consideration that the adapter height is 20 mm, so as a consequence:
• 30 mm (e.g. 3 x 10mm spacers): when using the adapter (20 mm) and the lower top 
cap (9mm)
• 20 mm (e. g. 2 x 10mm spacer): when using the adapter (20 mm) and the medium 
top cap (19mm)
• 10 mm (e. g. 1 x 10 mm spacer): when using the adapter (20 mm) and the higher top 
cap (29mm)

13.3 

46

13

. STEM AND BAR INSTALLATION AND ROUTING (FOUR CONFIGURATIONS)

Summary of Contents for DOGMA F12 Series





















































Reviews:

No comments

Related manuals for DOGMA F12 Series

VDO M5 Short Instruction Manual preview
M5
Brand: VDO Pages: 91
Magellan CYCLO 315 Series User Manual preview
CYCLO 315 Series
Brand: Magellan Pages: 39
Wintec Ego WBC 300 Plus Instruction Manual preview
Ego WBC 300 Plus
Brand: Wintec Pages: 4
Ohlins DU 871 Owner'S Manual preview
DU 871
Brand: Ohlins Pages: 20
PACIFIC CYCLE SCHWINN SLALOM RACER Owner'S Manual preview
SCHWINN SLALOM RACER
Brand: PACIFIC CYCLE Pages: 2
STONBIKE AUDI-2020S User Manual preview
AUDI-2020S
Brand: STONBIKE Pages: 15
CON-TEC Luna 40 N+ User Manual preview
Luna 40 N+
Brand: CON-TEC Pages: 8
Electra Amsterdam Series Owner'S Manual preview
Amsterdam Series
Brand: Electra Pages: 31
N-Com bluetooth kit3 User Instructions preview
bluetooth kit3
Brand: N-Com Pages: 32
WIKE 9032 User Manual preview
9032
Brand: WIKE Pages: 9
Ice Bear PST300C Manual preview
PST300C
Brand: Ice Bear Pages: 42
MONSTERPRO S508 User Manual preview
S508
Brand: MONSTERPRO Pages: 23
Bion X eBike Instruction Manual preview
eBike
Brand: Bion X Pages: 5
Rose electronics RUCKSICHT S Owner'S Manual preview
RUCKSICHT S
Brand: Rose electronics Pages: 2
Rose electronics RACE ATTACK SP-400-A Owner'S Manual preview
RACE ATTACK SP-400-A
Brand: Rose electronics Pages: 2
Optibike Argon Owner'S Manual preview
Argon
Brand: Optibike Pages: 25
Optibike Essex Owner'S Manual preview
Essex
Brand: Optibike Pages: 55
Optibike Elite R15C Owner'S Manual preview
Elite R15C
Brand: Optibike Pages: 68

Brands by name

Popular brands

Load more brands