manualshive.com logo in svg

PINARELLO DOGMA F12 Series, Assembly Manual

The PINARELLO DOGMA F12 Series is a high-performance road bike designed to elevate your cycling experience. To ensure proper assembly and maintenance, we provide a detailed Assembly Manual that you can easily download for free from our website. Get the most out of your bike by following the guided instructions available at manualshive.com.

Share
Download
background image

CICLI PINARELLO S.R.L. | Viale della Repubblica, 12 - 31020 Villorba (TV) - Italia

C.F. - R.I. - P.IVA IT 05994100963 | tel. +39 0422 42 08 77 | fax +39 0422 42 18 16 | www.pinarello.com

18

7.2 

- Apply the heat-shrinking tubes to the four cables.
- Connect the four cables to the junction SM-JC41 and warm up the heat-shrinking tubes. 
ATTENTION! max heating temperature 200°C, in order to not damage the electronic 
cables.
- Place the junction SM-JC41 into the frame through the BB sleeve hole.
ATTENTION! no cables must remain in the BB sleeve.

Rear Derailleur installation:
- Insert the RD wire grommet into the drop out exit hole.
- Install the rear derailleur to the RD hanger. Tighten following OEM torque spec.
- Attach the 750mm wire EW-SD50 to the RD.

7

. ELECTRONIC GROUPSET (DI2) INSTALLATION AND CABLE ROUTING

GROMMET

Summary of Contents for DOGMA F12 Series





















































Reviews:

No comments

Related manuals for DOGMA F12 Series

Lightfoot Greenway Technical Manual preview
Greenway
Brand: Lightfoot Pages: 42
Kabuto ZENARD-EX Instruction Manual preview
ZENARD-EX
Brand: Kabuto Pages: 28
Cannondale MOTO ALLOY Owner'S Manual Supplement preview
MOTO ALLOY
Brand: Cannondale Pages: 15
XSHIFTER ELink Manual preview
ELink
Brand: XSHIFTER Pages: 14
Rose electronics airik RT-CNC Owner'S Manual preview
airik RT-CNC
Brand: Rose electronics Pages: 2
SmartLab smartLAB cadspeed User Manual preview
smartLAB cadspeed
Brand: SmartLab Pages: 32
Dynacraft 700C CITY SCAPE PEDAL ASSIST BIKE 8802-46 Owner'S Manual preview
700C CITY SCAPE PEDAL ASSIST BIKE 8802-46
Brand: Dynacraft Pages: 25
Kinderkraft SPINSTEP User Manual preview
SPINSTEP
Brand: Kinderkraft Pages: 44
Marzocchi Monster T Instructions Manual preview
Monster T
Brand: Marzocchi Pages: 19
Rose electronics RUCKSICHT S Owner'S Manual preview
RUCKSICHT S
Brand: Rose electronics Pages: 2
Rose electronics RACE ATTACK SP-400-A Owner'S Manual preview
RACE ATTACK SP-400-A
Brand: Rose electronics Pages: 2
Grace ONE Manual preview
ONE
Brand: Grace Pages: 42
CycleOps PowerTap 2.4+ User Manual preview
PowerTap 2.4+
Brand: CycleOps Pages: 45
Crivit 307555 Owner'S Manual preview
307555
Brand: Crivit Pages: 33
Kellys KITE 12 Owner'S Manual preview
KITE 12
Brand: Kellys Pages: 38
PROTOTYPE PHYSIS MTB Instruction Manual preview
PHYSIS MTB
Brand: PROTOTYPE Pages: 4
DAHON Bike Service Manual preview
Bike
Brand: DAHON Pages: 28
Ortlieb GRAVEL-PACK Product Info preview
GRAVEL-PACK
Brand: Ortlieb Pages: 3

Brands by name

Popular brands

Load more brands