Pilz PSEN sg2c-3 Series, Operating Manual, Page: 34 / 79

Installation
Operating Manual PSEN sg2c
1003267­EN­02
34
Fig.: Unlock bolt
6.3 Second installation of safety switch and handle unit /
upgrade for left­hinged gates
}
Uninstall safety switch from the installation site.
} Uninstall handle unit from the gate. To do this, position the screwdriver in the slots of
the limit stop mechanism provided (see graphic " Unlock bolt".)
} Press screwdriver towards the base plate to release the spring­loaded limit stop mech­
anism.
} Disengage bolt tongue with handle unit in the actuator guide.
}
Remove exposed fixing screws.
} Unscrew ball handle from the handle unit.
}
Remove the cover of the handle unit from the bolt tongue (2 countersunk screws).
}
Take limit stop from the bolt tongue and insert it from the other side into the location
hole.
}
Turn bolt tongue around its longitudinal axis and screw together with the cover of the
handle unit.
}
Perform work steps from chapter Initial installation safety switch and handle unit [ 33
] .