Installation
Operating Manual PSEN sg2c
1003267EN02
28
6
Installation
}
When installing make sure you comply with the requirements of DIN EN 1088. and EN
ISO 14119.
}
The safety switch and handle unit should be installed opposite each other in parallel.
}
Safety switch and handle unit should be secured only with socket head cap screws M5
DIN EN ISO 4762.
NOTICE
It must not be possible to operate or remove the handle unit from inside the
danger zone. Protect the handle unit from access, e.g. by covers on the
hazard side of the door.
INFORMATION
The handle unit should be protected from unauthorised removal and from
contamination.
Safety switch and handle unit
}
Should not be exposed to heavy shock or vibration
}
Should not be used as a limit stop