Pilz PSEN sg2c-3 Series, Operating Manual, Page: 3 / 79

Content
Operating Manual PSEN sg2c
1003267­EN­02
3
Section 1 Introduction 5
1.1 Validity of documentation 5
1.2 Retaining the documentation 5
1.3 Definition of symbols 5
Section 2 Overview 7
2.1 Scope of supply 7
2.2 Unit features 7
Section 3 Safety 8
3.1 Intended use 8
3.2 Safety regulations 8
3.2.1 Use of qualified personnel 8
3.2.2 Warranty and liability 8
3.2.3 Disposal 9
3.3 For your safety 9
Section 4 Function description 10
4.1 Normal /Unlock mode 10
4.2 Escape release 11
4.3 Auxiliary release 12
4.4 Pushbutton 13
4.5 Device types 14
4.6 Block diagram 18
Section 5 Wiring 19
5.1 Notes on cable run 19
5.2 Recommended cable cross sections 20
5.3 General wiring guidelines 20
5.4 Terminal configuration 21
5.5 Wiring the connection terminals 22
5.6 E­STOP pushbutton connection 23
5.7 Enabling switch connection 23
5.8 EMC requirements 23
5.9 Connection to evaluation devices 24
5.9.1 Connection examples PNOZmulti 24
5.9.2 Connection examples PSS 24
5.10 Single connection 25
5.11 Series connection 25
Section 6 Installation 28
6.1 Install at profile 29
6.2 Initial installation safety switch and handle unit 33
6.3 Second installation of safety switch and handle unit / upgrade for left­
hinged gates 34
6.4 Inscription of buttons 35
6.5 Dimensions in mm 35
6.5.1 Drill holes 35