Close the arm cover, unlock TOTAL STOP and press the yellow illuminated button
SAFETYUpon starting the machine with the Power switch and loading the system,
a yellow screen will appear. That means the safety relay is not activated.
Activate the safety relay by pressing the yellow backlit button. When you activate
the safety relay, the machine will become operational and MAIN MENU will appear
on the panel.
The yellow screen also appears during the operation of the saw, anytime the
machine is stopped using the safety relay - by opening the arm cover or pressing
TOTAL STOP.After the elimination of the cause the machine will become
operational upon pressing the yellow backlit button.
On the Main Menu screen you can access all machine functions
regarding operation, settings or service. Control the screen by
putting your finger on the area of a particular button.
Upright font - information box (not affected by touch)
Italic (symbol) font - buttons (touch to initiate the function, or jump
to a different screen)
Note: Some information boxes or buttons are present on multiple
screens. Each of them is described only once in the instruction
manual, because they possess the same function on all screens.
After you press the TIME box, a screen with data about the
operating status of the machine appears (applies to all screens in
all modes). In the mode
Performing series
or
Series
interrupted
, the machine switches to SYSTEM 1 and SYSTEM 2
screen, on which you find all information about the PLC status,
inputs, outputs and information about the status of the frequency
converter and the actuator.
After pressing the DATE field in the AUTOMATIC MODE, SEMI-
AUTOMATIC MODE or MANUAL MODE, the machine switches
to the FAILURES screen.Should this field be flashing, there is an
active failure that has not yet been deleted.
By pressing any screen name (in this case the screen MAIN
MENU) you can adjust the illumination of the machine.
0 9 : 2 0 : 0 3
0 8 / 1 0 / 2 0 1 6
START/STOP
MAIN MENU
TOUCH SCREEN
ACTIVE
SERIES
NC
SERIES
4.1.1. Home screen / Main menu
MAIN MENU
0 9 : 2 0 : 0 3
0 8 / 1 0 / 2 0 1 6
NC
SERIES
ACTIVE
SERIES
Close the arm cover,
unlock TOTAL STOP
and press the yellow
illuminated button
SAFETY
MAIN MENU - DESIGNATION OF THE SCREEN NAME
TIME / OPERATIONAL STATE OF THE MACHINE
DATE / FAILURES
ACTIVE SERIES
in AUTOMATIC MODE
HYDRAULIC UNIT
MANUAL MODE
SEMI AUTOMATIC MODE
AUTOMATIC MODE
SERIES SETTINGS
MACHINE SETTINGS
FAILURES SCREEN
SAW BLADES
SERVICE CONTACT
INFO BUTTON
