FINISHED
After completing all of the series (or after terminating the currently
performed series using the Stop button), the screen displays
FINISHED. After pressing OK, the system goes back to the
default screen of the automatic mode. The machine does not
switch to the primary position because of the possibility of
continuing with other series without downcutting of the material.
If you need to exchange the material, press the button PRIMARY
POSITION. After the machine switches to the primary position,
the vices will be released.
After a long time of inactivity on this screen, the machine will go to
sleep - the hydraulic unit automatically shuts down. You can
activate it again by pressing the OK button.
Note: After successful completion of the series, the series
switches itself off. In the case of a request to cut the same series,
it is necessary to turn it back on.
4.1.6. Side menu
TIME + DATE SETTING
The screen TIME+DATE SETTINGS get activated after
pressing the button TIME+DATE on the MACHINE SET
UP
screen.
Input the current time in dark grey boxes in the red-outlined
box. After you input the time, press the
TIME
SETTING
button
to enter the set time into the system.
Input the current date in dark grey boxes in the red-outlined
box. After the input, you have to press the
DATE
SETTING
button to enter the specified date into the system.
MACHINE SETUP
LANGUAGE
– switch to the screen, selection of several
languages.
UNIT
- possibility of setting the unit length in mm or in inches
KERF
- setting of the kerf, i.e. the value, which the saw blade cuts
through the material. The system includes this value in the feed as
well. The correct setting is important particularly in the case of
multiple feeds
SERVO SPEED
- possibility to set the feed speed
1
- 3,0 m/min,
2
-
2,5 m/min,
3
- 1,6 m/min
BUNDLE-CUTTING HVP
- if the upper thrust is installed
(accessory), its function must be enabled (green tick)
EMULSION/OIL MIST
- you can switch between cooling by
coolant (red cross) or oil mist (accessories) (green tick)
PRESSURE SWITCHES
- switch to the screen with vice pressure
switch settings
TIME + DATE
- switch to the screen with system date and time
settings
SYSTEM
- switch to the system settings screen with converters,
servo motors, PLC settings. The screen is locked - only the
manufacturer or the distributor can edit the data.
WORM CHIPS TRANSPORTER
- switch to a service screen for
maintenance and cleaning of the machine
FINISHED
0 9 : 2 0 : 0 3
0 8 / 1 0 / 2 0 1 6
OK
Total time: 123 min
MACHINE SETUP
0 9 : 2 0 : 0 3
0 8 / 1 0 / 2 0 1 6
SYSTEM
BUNDLE-
CUTTING HVP
EMULSION /
OIL MIST
PRESSURE
SWITCHES
TIME+DATE
LANGUAGE
UNIT
KERF
SERVO
SPEED
0 HOU.
OPERATING
HOURS
ESC
(mm)
1.12
1
TIME + DATE SETTING
0 9 : 2 0 : 0 3
0 8 / 1 0 / 2 0 1 6
0
0
0
0
0
0
TIME
SETTING
DATE
SETTING
H
M
S
DD
MM
YYYY
ESC
