POWER SWITCH
ON
OFF
Use for emergency stop of the saw blade motor, coolant pump and
hydraulic unit motor (i.e. the whole machine).
You can put the machine back to operation only after you manually
unlock the switch by pulling or twisting!
TOTAL STOP
Before you start the saw blade motor, always make
sure that the saw blade is not in contact with the
workpiece at the point of cutting.
LAMP 24 V
Indicator lamp indicates that the CONTROL PANEL is under power supply of 24 V.
You can change the cutting speed using a saw blade speed controller (using a frequency converter) on the
control panel.
The display continuously shows the selected value within the range 15-90 m/min.
SAW BLADE SPEED CONTROLLER
EMERGENCY BUTTON
The button actuates a safety relay. When you activate the safety relay, the machine will become
operational and MAIN MENU will appear on the panel.
FAILURE INDICATOR
Indicator lamp indicates that the machine has generated an error.
POWER SWITCH
