0. General
This instruction manual provides the user with assistance and information about the PILOUS metal-cutting band saw and the
possibilities of use corresponding to its purpose. The instruction manual contains important instructions on a safe, adequate and
economically efficient operation. Observing the operating instructions will prevent risks; the repair and outage time costs will be
reduced and the machine reliability and life increased. The instruction manual contains instructions based on the valid national
safety regulations and environmental standards. The instruction manual must be always available at the machine site. The
instruction manual must be read and used by the staff entrusted with the machine installation, transport and storage, use / operation,
maintenance and disposal. In addition to the instruction manual and binding safety regulations in force in the user's country and at
the service site, it is also necessary to observe the approved rules for safe and professional work.
Letter of Guarantee - Service
The Letter of Guarantee is a separate annex to the instruction manual.
Guarantee Period
- see Letter of Guarantee
Conditions for Maintenance of Claims under Guarantee
• Transport and storage of the machine in accordance with the instruction manual
• Use and operation of the machine in accordance with the instruction manual
• Connection of the machine to the power supply in accordance with the instruction manual
The guarantee does not apply to:
• Violent and mechanical damage of the machine caused by interference of the user or other persons.
• Inevitable events (natural disaster).
• Damage to the machine during transport.
• Storage or installation of the machine in humid, chemical or any other inappropriate environment.
• Wear parts (see the Letter of Guarantee).
Potential claims concerning guarantee and after-guarantee repairs should be made by phone, post or e-mail to
the address: see the Letter of Guarantee.
Instruction for the User:
The Seller is obliged to hand over to the User the Letter of Guarantee immediately with the purchase of the product. The Letter of
Guarantee must be properly and legibly filled out and confirmed by the Seller’s stamp, signature and date of purchase. The Seller is
obliged to inform the Buyer about the use and handling of the product.
Data Necessary for Claiming Guarantee (After-Guarantee) Repair
• Machine type
• Letter of Guarantee Number (identical with the serial number of the machine)
• Date of issue of the Letter of Guarantee
0.1. Safety Provisions
The machine design complies with the technical status and the approved safety and technical rules. In spite of this, the user's or the
third persons' health can be endangered and/or the machine or other tangible goods may be unfavorably influenced during the
operation of the machine. In order to prevent such hazards, it is absolutely necessary to observe the safety instructions in this
instruction manual. These safety instructions must be read and understood by relevant personnel before the machine commencing.
Failure to observe these instructions may lead to serious health and property damage! The safety instructions in this instruction
manual are marked with safety symbols / danger spot signs.
Use protective gloves!
Before using the bandsaw, read this instruction
manual carefully and make sure you
understand its content!
Use boots or work shoes with a steel toe.
And with anti-slide soles.
Use hearing protection!
Use protective goggles!
Warning: Dangerous spot -
Use the highest caution!
Caution: Dangerous voltage!
Health hazard by flying particles!
Danger of injury by compression!
Danger of injury by cutting!
