Introduction to the phyCORE-MPC565
© PHYTEC Meßtechnik GmbH 2009 L-647e_2
7
Development Board Technical Highlights
•
Development Board in EURO-card dimensions (100 x 160 mm)
•
high-density (0.635 pitch) Molex connector for speedy and secure
insertion, and subsequent programming, of the
phyCORE-MPC565 Single Board Computer module
•
socket for +5VDC power supply connectivity
•
2x RS-232 at DB-9 sockets
•
2x CAN interfaces at DB-9 plugs
•
RJ-45 Ethernet interface
•
DB-25 plug for BDM interface to support direct connection to PC
printer port, on-board signal conversion
•
10-pin header connector for interfacing to external BDM devices
•
40-pin Nexus interface (populated)
•
space available for population of 50-pin Nexus connector
•
various power and status LEDs for monitoring all available supply
voltages and specific controller signals
•
reset and boot push buttons
•
Expansion Bus: address, data, interface and all applicable I/O
signals route from implemented phyCORE module to 2 x 80-pin
Molex connectors, enabling connectivity to PHYTEC
Add-On
hardware
