Getting
Started
© PHYTEC Meßtechnik GmbH 2009 L-647e_2
13
2
Getting Started
What you will learn with this Getting Started example:
•
installing Freescale CodeWarrior for PowerPC Embedded Systems
•
installing the Rapid Development Kit software
•
interfacing the phyCORE-MPC565, mounted on the Development
Board, to a host-PC
•
downloading example user code from a host-PC to the
phyCORE-MPC565 on-board memory
2.1
Installing the Freescale CodeWarrior Tool Chain
When you insert the Freescale CodeWorrior CD into the CD-ROM
drive of your host-PC, the Freescale CodeWarrior CD should auto-
matically launch a setup program that installs the required software.
Otherwise the setup program
launch.exe
can be manually executed
from the root folder of the Freescale CodeWarrior CD.
The applicable CodeWarrior tool chain must be installed to ensure
successful completion of this QuickStart Instruction. Failure to install
the proper software could lead to possible version conflicts, resulting
in functional problems.
A 15-day evaluation license key is included with the installation. After
that, the full license needs to be requested from Freescale using the
integrated registration wizard. This is required to use Freescale
CodeWarrior Tool Chain.
For installation on WinNT, Win2000 or WinXP hosts you must have
administrator privileges.
•
Install the Freescale CodeWarrior for Embedded PowerPC Targets
tool chain from the enclosed Freescale CD, following the steps
indicated in the install procedure.
