Getting
Started
© PHYTEC Meßtechnik GmbH 2009 L-647e_2
39
2.5.4
Downloading Hello_Fl to the External Standard Flash
(PCM-019-1010E Only)
This example demonstrates burning code to the external standard
Flash on the phyCORE-MPC565. The example program will be
downloaded to the standard Flash devices at U5/U6 (AM29LV type).
Note:
This example only applies to phyCORE-MPC565 modules with part
number PCM-019-1010E and the latest EPLD firmware. For modules
sold prior to 2/10/05 please see Application
Note LAN-033e for
instructions on updating the EPLD firmware.
•
Disconnect the power adapter from Development Board.
•
Reconnect the DB-25 parallel cable.
•
Change Jumper JP17 to position 2+3 (
refer to Figure 3
).
•
Reconnect the power adapter to Development Board.
•
From the pull-down menu, at the top of the
Hello_Fl.mcp
project
window, make sure the software target "
rom
" is selected.
•
Open the
Flash Programmer
window by selecting
Tools /
FlashProgrammer
from the pull-down menu.
•
The following window will appear:
