Phytec phyCORE-167CR, Hardware Manual

Page: 9 / 114

Contents

PHYTEC Meßtechnik GmbH 2002 L-527e_8
Table 43: Improper Jumper Settings for the CAN Plug P2B (CAN
Transceiver on the Development Board, only with C167CS) ....79
Table 44: Jumper Configuration for CAN Plug P2A using the CAN
Transceiver on the Development Board with Galvanic
Separation (only with C167CS)..................................................80
Table 45: Improper Jumper Settings for the CAN Plug P2B
(CAN Transceiver on Development Board with
Galvanic Separation) ..................................................................81
Table 46: JP17 Configuration of the Programmable LED D3...................82
Table 47: Pin Assignment Data/Address Bus for the
phyCORE-167CR/167CS / Development Board /
Expansion Board.........................................................................84
Table 48: Pin Assignment Port P2, P3, P4 for the
phyCORE-167CR/167CS / Development Board /
Expansion Board.........................................................................85
Table 49: Pin Assignment Port P5, P6, P7, P8 for the
phyCORE-167CR/167CS / Development Board /
Expansion Board.........................................................................86
Table 50: Pin Assignment Interface Signals for the
phyCORE-167CR/167CS / Development Board /
Expansion Board.........................................................................87
Table 51: Pin Assignment Control Signals for the
phyCORE-167CR/167CS / Development Board /
Expansion Board.........................................................................87
Table 52: Pin Assignment Power Supply for the
phyCORE-167CR/167CS / Development Board /
Expansion Board.........................................................................88
Table 53: Unused Pins on the phyCORE-167CR/167CS /
Development Board / Expansion Board .....................................89
Table 54: JP28 Releasing the /NMI Interrupt ............................................90
Table 55: JP19 Jumper Configuration for Silicon Serial Number Chip .....90
Table 56: Pinout Pin Header Row X3 on the
debugCORE-167CR/167CS .......................................................94
Table 57: Connector Layout of the of the Quad-Connector (X6)...............97