Phytec phyCORE-167CR, Hardware Manual

Page: 67 / 114

The phyCORE-167CR/167CS on the phyCORE-Development Board

PHYTEC Meßtechnik GmbH 2002 L-527e_8
57
14.2.2 Jumpers on the phyCORE Development Board HD200
Peripheral components of the phyCORE Development Board HD200
can be connected to the signals of the phyCORE-167CR/167CS by
setting the applicable jumpers.
The Development Board’s peripheral components are configured for
use with the phyCORE-167CR/167CS by means of insertable
jumpers. If no jumpers are set, no signals connect to the DB-9
connectors, the control and display units and the CAN transceivers.
The Reset input on the phyCORE-167CR/167CS directly connects to
the Reset button (S2). Figure 10 illustrates the numbering of the
jumper pads, while Figure 11 indicates the location of the jumpers on
the Development Board.
Figure 10: Numbering of Jumper Pads
Figure 11: Location of the Jumpers (View of the Component Side)
z.B.: JP28
z.B.: JP23 z.B.: JP24