Phytec phyCORE-167CR, Hardware Manual

Page: 19 / 114

Pin Description

PHYTEC Meßtechnik GmbH 2002 L-527e_8
9
The following figure (Figure 3) illustrates the numbered matrix
system. It shows a phyCORE-167CR/167CS with SMT
phyCORE-connectors on its underside (defined as dotted lines)
mounted on a Development Board. In order to facilitate understanding
of the pin assignment scheme, the diagram presents a crossview of the
phyCORE module showing these phyCORE-connectors mounted on
the underside of the module’s PCB.
Figure 3 Pinout of the phyCORE-connector (Top View, with Cross Section
Insert)
Many of the controller port pins accessible at the connectors along the
edges of the board have been assigned alternate functions that can be
activated via software.
A B C D
1
1