Photron FASTCAM Multi, Hardware Manual

Page: 30 / 81

Chapter 2 Setup
16
2.3.7. Power Supply Connector
The DC power supply input connector. Connect to the supplied AC adapter or the optional High-G
Battery.
The cable connector is optionally available. When using other power supplies, construct a cable
using the pin diagram below as a reference.
DC20-34V 180VA Pin Diagram
ECJ.2B.304.CLD
Connector
Name
Signal Name
Pin
No.
Camera Body Connector
Model Name
(Manufacturer)
Cable Connector
Model Name
(Manufacturer)
DC20-34V
180VA
+20V ~ +34V IN 1
ECJ.2B.304.CLD
(LEMO)
FGJ.2B.304.CYMD82Z
(LEMO)
GND 2
GND 3
+20V ~ +34V IN 4
When using the connector pins directly, refer to the chart above and ensure the wiring is
correct.
If the wiring is incorrect, not only is there the danger of the system malfunctioning, but
also of fire and electric shock.
Do not use a power supply which does not meet the system's specifications, or a power
supply you cannot guarantee the safety of.
By using a power supply outside of the system specifications, not only is there the
danger of the system malfunctioning, but also of fire and electric shock.
Please use an external power supply with the suitable rating which was estimated by
IEC/EN 61010-1 3
rd
Edition (compiled with CI. 6.3 and CI. 2.5), and separated from the
main circuit by double insulation or reinforced insulation
Warning
Warning
Warning