Photron FASTCAM Multi Hardware Manual Download Page 21

Page: 21 / 81

FASTCAM Multi Hardware Manual

2.3.

Part Names

This product comprises the following components: the camera and processor, AD adapter and

control software [The Photron FASTCAM Viewer (

“PFV” hereinafter)]. It is used in conjunction with

various optional items as necessary.

For each of the system components.

- Do not expose to shock.

- Do not use in an area where flammable gas or dust is present.

- Do not place in an unstable location such as on an unstable platform or an incline.

- Do not disassemble or modify.

- Do not expose to liquids such as water.

- Do not subject to excessive force.

2.3.1. Main Unit

The processor (Main Unit) incorporates a memory unit, which is so designed to allow the

high-speed image to be recorded as uncompressed digital data. The front panel has connectors

installed for video output, which makes it possible to monitor the recorded image being played back,

the Gigabit Ethernet interface to connect to the PC for full control and data download. Also installed

are such connectors as IN/OUT connectors for external sync and trigger signal, and interface for the

IRIG time code input. FAST Drive models have their own connection terminal.

FASTCAM Multi Main Unit

Summary of Contents for FASTCAM Multi


















































































Search results

Summary of Contents for FASTCAM Multi

Reviews:

Related manuals for FASTCAM Multi

Brands by name

Popular brands

Photron FASTCAM Multi, Hardware Manual

Search results

Summary of Contents for FASTCAM Multi

Reviews:

Related manuals for FASTCAM Multi

Brands by name

Popular brands