22
English Español
Acapela 16
Ecualizador Paramétrico (EQ)
Este menú es para un fácil ajuste del ecualizador paramétrico en pantalla, en los canales de entrada y salida.
Las unidades Acapela 16 proporcionan un ecualizador paramétrico de 4 bandas en cada canal de entrada,
salidas Multi 1 a 4 y Main Mix. Todos los parámetros se ajustan con los codificadores de datos o pantalla
táctil. Los usuarios pueden seleccionar un aumento o reducción de hasta 18 dB en frecuencias entre 20 Hz y
20 KHz. Las unidades Q de estas señales también se pueden ajustar para dar una banda más ancha o más
estrecha. En el IPAD, esto se hace tocando la pantalla en la parcela y luego usando un segundo dedo para
deslizar desde o hacia la trama. A la derecha de este menú, usted encontrará los controles de canales típicos
de la mezcla seleccionada (fader, solo, medidor pre / post, etc.)
PEQ On:
Este botón activa/desactiva el PEQ actual-
mente seleccionado.
Reset /Restaurar:
Este botón reinicializa cada banda
del ecualizador paramétrico seleccionado...
Band On/Off:
Hay 4 bandas en total en el PEQ.
Estos se pueden activar y desactivar con los botones
numerados justo debajo del grafico PEQ
Plots:
Los elementos en el gráfico PEQ se pueden
mover en la pantalla con sólo tocarlos y moverlos a
la posición deseada.
Ajustes:
En la parte inferior de la pantalla, los usu-
arios pueden ver la configuración actual del PEQ
seleccionado, incluyendo el gain, la frecuencia y el Q.
Estos se pueden ajustar en incremento o decremento
según sea necesario.
Parámetro
1
2
3
4
Gain
-18 dB a +18 dB
Frec.
20 Hz a 20 kHz
Q
10 a 0.1,
HPF, Shelf
10 a 0.1
10 a 0.1,
HPF, Shelf
Cuando está en modo de escritorio/desktop, pase
el cursor sobre el ajuste que desea cambiar y pulse
el botón izquierdo para reducir el valor y el derecho
para aumentarlo.
Type:
Para las bandas 1 y 4, puede seleccionar el
botón TYPE para seleccionar entre un estilo pico de
EQ, un corte bajo.
Faders:
Para ajustar el nivel de la mezcla seleccio-
nada, toque y mantenga presionado el fader virtual
en pantalla y deslice el dedo hacia arriba y abajo de
la pantalla.
Botón Pre/Post :
Ajusta la medida de la mezcla se-
leccionada entre la de un de pre-fader y post-fader.
Esto le permite ver la diferencia entre la señal de
entrada y la señal de salida.
On/Off:
Apague u enciende accionando el botón ON.
Cuando está encendido, se ilumina el botón.
Solo:
Los botones de solo envían la combinación
seleccionada a la mezcla de Control Room. Para
más opciones de configuración individuales, los
usuarios pueden ver las propiedades en el menú
de Control Room.
Botones Izquierdo / Derecho:
Utilice las flechas
izquierda y derecha para desplazarse por las difer-
entes mezclas.