16
English Español
Acapela 16
Orden de Procesamiento (Processing Order):
Utilice esta función para seleccionar el orden en que
la señal de audio pasara a través del procesador de
dinámica, EQ y Delay. Cualquier orden formado de
los tres procesadores se puede seleccionar.
Botón Invert Phase ( Inversión de Fase):
Este
botón invierte la fase de la señal actual.
Pan Control:
Seleccione el control de panorama y
utilice la rueda a bordo para ajustar el platillo izqui-
erdo y derecho de la señal de entrada.
AUX Send Controls:
Estos controles giratorios
virtuales se pueden utilizar para ajustar el nivel del
canal seleccionado que se envía a la mezcla AUX.
Los botones de Pre / Post le permiten cambiar los
envíos correspondiente del canal de pre -fader a
post-fader, pre -EQ a post- EQ, pre - dinámica a
post- dinámica.
Group Assignment:
Pulse cualquiera de estos bo-
tones para enviar el canal seleccionado a la mezcla
del grupo correspondiente. El nivel de la señal de la
mezcla del grupo también se mostrará en el botón
(en decibelios).
Botón to MAIN:
Pulsando este botón, se envía la
señal del canal seleccionada a la mezcla principal .
Selección de canal (Channel Select):
El canal
actualmente seleccionado se mostrará en la parte
superior derecha del menú. Los usuarios pueden
seleccionar el canal del cual desean ver las propie-
dades pulsando las flechas izquierda y derecha.
Solo Button:
Esto activará la función solo en el canal
seleccionado en ese momento. Cuando se individu-
aliza un canal, la señal se desvía a la mezcla de sala
de control para la supervisión. Si el canal actual está
en solo con modo SAFE, la palabra SAFE aparecerá
en este botón.
Botón Off / On:
Este botón cambia el canal selec-
cionado de activo a apagado.
Channel Fader:
Los usuarios pueden utilizar este
deslizador virtual para ajustar el nivel del canal de
entrada seleccionado actualmente.
Canal Metro (Channel Meter):
El medidor propor-
ciona actualizaciones en tiempo real sobre el nivel de
la señal del canal seleccionado. El medidor muestra
el nivel de la señal de entrada o salida, dependiendo
de cómo esté configurado el botón Pre/Post Meter.
Botón Pre/Post Meter:
Este botón cambiará el me-
didor de nivel de un pre-fader (entrada) a un medidor
post-fader.
Nombre del canal / Channel Name:
El nombre del
canal se puede ver y editar en la parte inferior del
fader.
Source Botones de (Main Only):
La parte inferior de
la página general ofrece botones individuales fuente
para cada canal y submezcla. Empujar cualquiera
de estos y de inmediato le asignará directamente a
la mezcla principal. Por favor recuerde que la asig-
nación de la mezcla dependerá de si los volúmenes
respectivos de los canales están activados y si los
canales en sí son on.