Phoenix RPC12 Series, Cli Reference Manual

Page: 212 / 245

Chapter 3 Command Descriptions 213
show volume-maps
Description
Shows mapping information for a specified volume or for all volumes.
Input
Output
show volume-maps [ volume ]
Parameter Description
volume
Specifies the volume by its name or serial number. For the syntax to use,
see “Volume Syntax” on page 25. If this parameter is omitted,
information for all volumes is shown.
Field Description
SN
Volume serial number
Name
Volume name
CH
Host channels that volume is mapped on
ID
Host channel ID
LUN
Logical unit number
Access
Access mode: read-write (rw) or read-only (ro)
Port-WWN
FC only:
• HBA world wide port name (WWPN)
•
all other hosts
for the default mapping of the volume
Host-Port-
Identifier
iSCSI only:
• IP address of the host port
•
all other hosts
for the default mapping of the volume
Nickname
HBA name, or blank if not set or for
all other hosts