Phoenix RPC12 Series, Cli Reference Manual

Page: 49 / 245

50 Phoenix RPC12 Series CLI Reference Manual • September 2008
create master-volume
Description
Creates a volume on a specified virtual disk, enables the volume for snapshots, and
associates it with an existing snap pool. The volume and snap pool must be owned
by the same controller.
Input
Example
Create the 1-Gbyte master volume MV1 on virtual disk VD1, and associates it with
snap pool SP1.
create master-volume vdisk
vdisk
size
size
MB|GB|TB
snap-pool volume name [lun LUN ]
Parameter Description
vdisk
vdisk
Specifies the virtual disk by name or serial number. For the
syntax to use, see “Virtual Disk Syntax” on page 25.
size
size
MB|GB|TB
Specifies the volume size in
MB
(Mbyte),
GB
(Gbyte), or
TB
(Tbyte). The size uses base 10 (multiples of 1000) or
base 2 (multiples of 1024); to see the current base setting,
type
show cli-parameters
.
snap-pool
volume
Specifies the snap pool volume by its name or serial
number. For the syntax to use, see “Volume Syntax” on
page 25.
name
Specifies a name for the new master volume, using a
maximum of 20 characters and no apostrophe ('), quotation
mark ("), or backslash (\) characters.
lun
LUN
Optional. Specifies a logical unit number to assign to the
new master volume. If this parameter is omitted, no LUN is
assigned.
#
create master-volume vdisk VD1 size 1GB snap-pool SP1 MV1