![background image](http://html1.mh-extra.com/html/phoenix/rpc12-series/rpc12-series_cli-reference-manual_1551300063.webp)
64
Phoenix RPC12 Series CLI Reference Manual • September 2008
create volume
Description
Creates a volume on a virtual disk. This command enables you to specify a size and
name for the volume, and map it to hosts.
Input
Example
Create the 10-Gbyte volume V1 on virtual disk VD1, and map it to LUN 12 on
channel 1.
create volume vdisk
vdisk
size
size
MB|GB|TB [mapping
mapping
]
name
Parameter
Description
vdisk
vdisk
Specifies the virtual disk by name or serial number. For the
syntax to use, see “Virtual Disk Syntax” on page 25.
size
size
MB|GB|TB
Specifies the volume size in
MB
(Mbyte),
GB
(Gbyte), or
TB
(Tbyte). The size uses base 10 (multiples of 1000) or
base 2 (multiples of 1024); to see the current base setting,
type
show cli-parameters
.
mapping
mapping
Optional. Specifies the host-to-volume mapping. For the
syntax to use, see “Volume Mapping Syntax” on page 26. If
this argument is omitted, the volume is unmapped and its
LUN is set to
None
.
name
Specifies a name for the volume. For the syntax to use, see
“Volume Syntax” on page 25.
#
create volume vdisk VD1 size 10GB mapping 1.12 V1
Summary of Contents for RPC12 Series
