Phoenix RPC12 Series, Cli Reference Manual

Page: 24 / 245

Chapter 1 Using the CLI 25
Virtual Disk Syntax
You can specify virtual disks by using either:
Q
Virtual disk serial number. A unique 32-digit number that is automatically
assigned when a virtual disk is created, and does not change for the life of the
virtual disk.
Q
Virtual disk name. A user-defined, case-sensitive name that can include 20
characters. Allowed characters include letters, numbers, hyphens, underscores,
and spaces. A name that includes a space must be enclosed in quotation marks.
Some commands accept a comma-separated list of virtual disk serial numbers and
names. Do not include spaces before or after commas. The following virtual disk
list specifies a serial number and two names:
Volume Syntax
You can specify volumes by using either:
Q
Volume serial number. A unique 32-digit number that is automatically assigned
when a volume is created, and does not change for the life of the volume.
Q
Volume name. A user-defined name that can include a maximum of 17 printable
ASCII characters. A name cannot include a comma, backslash (\), or quotation
mark (
"
); however, a name that includes a space must be enclosed in quotation
marks. Names are case sensitive.
Note – Volumes on different virtual disks can have the same name.
Some commands accept a comma-separated list of volume serial numbers and
names. Do not include spaces before or after commas. The following volume list
specifies a serial number and two names:
00c0ff0a43180048e6dd1c4500000000,Sales/Mktg,”Vdisk #1”
AA43BF501234560987654321FEDCBA,Image-Data,”Vol #1”