![background image](http://html1.mh-extra.com/html/phoenix/rpc12-series/rpc12-series_cli-reference-manual_1551300132.webp)
Chapter 3 Command Descriptions
133
set snmp-parameters
Description
Configures SNMP notification of events.
Input
Example
Enable critical events only, specify a trap host, and set the community string for
read-only access.
Related Commands
Q
“show snmp-parameters” on page 198
set snmp-parameters [enable crit|warn|info|none]
[add-trap-host
IP
] [del-trap-host
IP
] [read-community
string
]
[write-community
string
]
Parameter
Description
enable crit|warn|info|none
Optional. Sets the level of trap notification:
•
crit
: Sends critical events only.
•
warn
: Sends all critical events and
warnings.
•
info
: Sends all events.
•
none
: All events are excluded from trap
notification and traps are disabled.
add-trap-host
IP
Optional. Adds a destination host to send
traps to. Three trap hosts can be set.
del-trap-host
IP
Optional. Deletes a trap destination host.
read-community
string
Optional. Sets an alphanumeric community
string for read-only access.
write-community
string
Optional. Sets an alphanumeric community
string for write access.
#
set snmp-parameters enable crit add-trap-host 172.22.4.171
read-community public
Summary of Contents for RPC12 Series
