![background image](http://html1.mh-extra.com/html/phoenix/rpc12-series/rpc12-series_cli-reference-manual_1551300099.webp)
100
Phoenix RPC12 Series CLI Reference Manual • September 2008
scrub vdisk
Description
For specified RAID 3, 5, 6, and 50 virtual disks, the command verifies all parity
blocks and corrects any bad parity. For specified RAID 1 and 10 virtual disks, the
command compares the primary and secondary drives and if it finds a mismatch it
copies the primary to the secondary.
In addition, this command scrubs virtual disk metadata and stripe and NRAID
virtual disks. When scrub of a virtual disk is complete, an event is logged specifying
the number of errors found.
Input
Example
Scrub the disk drives in virtual disk
VD1
.
Related Commands
Q
Q
scrub vdisk
vdisks
Parameter
Description
vdisks
Specifies the virtual disks by name or serial number. For the syntax to
use, see “Virtual Disk Syntax” on page 25.
#
scrub vdisk VD1
Summary of Contents for RPC12 Series
