![background image](http://html1.mh-extra.com/html/phoenix/rpc12-series/rpc12-series_cli-reference-manual_1551300096.webp)
Chapter 3 Command Descriptions
97
restore defaults
Description
Note –
This command should only be used by service technicians, or with the
advice of a service technician.
Restores the manufacturer's default configuration to the controllers. When the
command informs you that the configuration has been restored, you must restart the
RAID controllers and management controllers for the changes to take effect. After
restarting the controllers, hosts might not be able to access volumes until you re-
map them.
Caution –
This command changes how the system operates and might require some
reconfiguration to restore host access to volumes.
Input
Related Commands
Q
Q
Q
restore defaults [noprompt]
Parameter
Description
noprompt
Optional. Suppresses the confirmation prompt.
Summary of Contents for RPC12 Series
