Phoenix RPC12 Series, Cli Reference Manual

Page: 136 / 245

Chapter 3 Command Descriptions 137
set vdisk
Description
Sets the name and owning controller for an existing virtual disk.
Input
Example
Rename virtual disk VD1 and reassign its ownership.
Related Commands
Q
“show vdisks” on page 208
set vdisk vdisk [name new-name ] [owner a|b]
Parameter Description
vdisk
Specifies the virtual disk by name or serial number. For the
syntax to use, see “Virtual Disk Syntax” on page 25.
name
new-name
Optional. Specifies a new name for the virtual disk. For the
syntax to use, see “Virtual Disk Syntax” on page 25.
owner a|b
Optional. Sets the owner of the virtual disk to controller A
(upper) or controller B (lower).
#
set vdisk VD1 name VD2 owner a