Phoenix Contact FL SWITCH 2005, User Manual, Page: 49 / 98

Configuration and diagnostics in web-based management
107065_en_01 PHOENIX CONTACT
49
– Lease Time (s): the time that the DHCP server leases an IP address to a client before it
has to report to the server again can be set here. The value must be between 300 and
2592000 seconds, “0” is interpreted as an infinite time (default: 3600).
– Accept Bootp: here you can set whether the switch acting as the DHCP server accepts
BootP requests. If this function is activated, an IP address with an infinite lease time is
assigned to the requesting DHCP clients.
Port-based DHCP Configuration: opens the “Port-based DHCP Configuration” pop-up.
Current DHCP leases: opens the “Current DHCP Leases” pop-up where the IP addresses
that are currently assigned are displayed.
DHCP static leases: opens the “DHCP Static Leases” pop-up for configuring static IP ad-
dress assignment.
Pop-up: Port-based DHCP Configuration
The port-based DHCP server functionality can be configured in this pop-up.
– Select Port: select the port for which you wish to carry out port-based DHCP server con-
figuration here.
– Local Service enable: activate the port-based DHCP server functionality for the select-
ed port here.
– Local IP: enter the IP address that is assigned to the client at the selected port here.
– Netmask: enter the subnet mask that is assigned to the client at the selected port here.
– Router: enter the gateway address that is assigned to the client at the selected port
here.
– DNS: enter the DNS address that is assigned to the client at the selected port here.
Figure 5-30 “DHCP Port Local Service” pop-up
Pop-up: Current DHCP Leases
This pop-up displays the IP addresses that are currently assigned.
– Leased IP: displays the assigned IP addresses.
– Client ID: displays the MAC address of the client to which the IP address is assigned.
– System Uptime: displays the time that has elapsed since the IP address was assigned
to the client.
– Local Port: indicates the port to which the client is connected.
– State: indicates the status of the client.
– Lease count: displays the number of assigned IP addresses.