Phoenix Contact FL SWITCH 2005, User Manual, Page: 40 / 98

FL SWITCH 2000
40
PHOENIX CONTACT 107065_en_01
Network Mask: set the desired subnet mask here.
Default Gateway: set the desired default gateway here.
Management VLAN: set the VLAN here, in which the management is to be located (default:
“1”).
ACD Mode: you can enable/disable the “Address Conflict Detection” function here.
ACD Status Information: clicking on the link opens the “Device Status” page.
Figure 5-19 ACD status information on the “Device Status” page
5.2.2.4 Service
Figure 5-20 “Service” web page
Web Server: you can enable/disable the web server function and select the mode
(HTTP/HTTPS) here.
SNMP Server: you can enable/disable the SNMP server function and the mode (SNMP v2,
SNMP v3) here.
CLI Service:
– Disable: entry of CLI commands is deactivated
– Telnet: entry of CLI commands via Telnet is activated
– SSH: entry of CLI commands via Secure Shell (SSH) is activated
CLI Network Scripting UI:
– Disable: transmission of CLI commands via the network is deactivated
– Enable: transmission of CLI commands via the network is activated
For additional information on using the CLI, refer to “Configuration and diagnostics via
Command Line Interface (CLI)” on page 57.