Phoenix Contact Axioline F, User Manual, Page: 83 / 86

Validation
105739_en_04 PHOENIX CONTACT
83
D 4 Validation
Checklist for validating the module
Device type/equipment identification
Version: HW/FW Date
Editor Test engineer
Comment
No. Requirement (mandatory) Yes Comment
1 Have all the mandatory requirements for the “Planning” checklist been
met?
2 Have all the mandatory requirements for the “Assembly and electrical
installation” checklist been met?
3 Have all the mandatory requirements for the “Startup and
parameterization” checklist been met?
4 Does the parameterization of the safe outputs correspond to the
version and the actual connection of the controlled devices?
5 Has the assignment of the actuators to the outputs and the variables of
the safe application program been tested (online status in
SafetyProg)?
6 Has a function test been performed to check all safety functions in
which the module is involved?
7 Have measures been taken to achieve a specific Cat.?
8 Do all cables correspond to the specifications?
9 Does the power supply correspond to the specifications for the
protective extra-low voltage in accordance with PELV?
10 Has the power supply of U
O
and U
BK
in the Axioline F system from a
power supply unit been implemented?
11 Is external protection of the module implemented (according to the
specifications in this user manual for supply voltage U
O
)?
12 Have measures been taken to prevent simple tampering?
13 Are requirements for the actuators and cable installation observed
according to the SIL/SILCL/Cat./PL to be achieved?
14 Are the specifications for the parameterization for each channel
implemented?
15 Have test intervals been defined for testing the shutdown capability of
the actuators, if this is required to achieve a SIL/SILCL/Cat./PL?
16 Has it been ensured that any person intentionally starting hazardous
movements can only do so with a direct view of the danger zone?
Date Signature (editor)
Date Signature (test engineer)