Phoenix Contact Axioline F, User Manual, Page: 55 / 86

Errors: messages and removal
105739_en_04 PHOENIX CONTACT
55
8.1.5 Examples for reading a diagnostic message
Example 1: Reading an error due to cross-circuit at channel 3 (priority 2) with subsequent
acknowledgment
You can acknowledge the error after removing the error cause:
• Write “05hex” to ResetDiag object 0x0019.
Example 2: Reading a parameterization error (priority 1)
This error cannot be acknowledged as it is a priority 1 error.
• Check and correct the parameterization.
Read DiagState object 0x0018
DiagState of slot 1:
Consecutive
no.:
1
Priority: 0x02 (2), warning active
Channel/
Group/Module:
3
Code: 0x2371 (9073), cross-circuit to another output or external voltage
MoreFollows: 02 DiagStateAddValue available
Text:
Read DiagStateChannelNo object 0x0033
Consecutive
no.:
1
ChannelNo: 0x03
Read DiagState object 0x0018
DiagState of slot 1:
Consecutive
no.:
2
Priority: 0x01 (1), alarm active
Channel/
Group/Module:
0
Code: 0x6320 (25376), parameter table invalid
MoreFollows: 02 DiagStateAddValue available
Text:
Read DiagStateChannelNo object 0x0033
Consecutive no.: 2
ChannelNo: 0x0000
Read DiagStateAddValue object 0x0034
Consecutive no.: 2
AddValue: 0x0230