Connecting and wiring hardware
107709_en_00
PHOENIX CONTACT
5.2.2
Connecting the power supply
Observe the notes in Section 3.11 when assembling the connector for the supply voltage.
•
Strip 8 mm off the cable. If necessary, fit a ferrule to the cable.
Solid conductor /
ferrule
•
Insert the cable into the terminal point. It is clamped into place automatically.
Figure 5-3
Connecting a solid cable
Stranded conductor
•
Open the spring by pressing on the spring lever with a screwdriver (A in Figure 5-4).
•
Insert the conductor into the terminal point (B in Figure 5-4).
•
Remove the screwdriver to fasten the cable (recommended: bladed screwdriver, blade
width of 2.5 mm (e.g. SZS 0,4x2,5 VDE, Order No. 1205037)
Figure 5-4
Connecting a stranded conductor
If you are using ferrules, use them in accordance with the specifications in the
UM EN AXL F SYS INST user manual.
•
Ensure that the ferrules are correctly crimped.
A
B
