AXC F 1050
PHOENIX CONTACT
107709_en_00
11.3
Device failure and repair
Repairs may only be carried out by Phoenix Contact.
•
Send faulty devices back to Phoenix Contact for repairs or to receive a replacement de-
vice.
•
We strongly recommend using the original packaging to return the product.
•
Include a note in the packaging indicating that the contents are returned goods.
•
If the original packaging is no longer available, observe the following points:
–
Observe the humidity specifications and the temperature range specified for trans-
port (see Section “Technical data” on page 125).
–
If necessary, use dehumidifying agents.
–
Use appropriate ESD packaging to protect components that are sensitive to elec-
trostatic discharge.
–
Secure any loose parts.
–
Make sure that the packaging you select is large enough and sufficiently thick.
–
Only use plastic bubble wrap sheets as filler material.
–
Attach warnings to the transport packaging so that they are clearly visible.
–
Please ensure that the delivery note is placed inside the package in the case of
packages that are to remain within the same country. However, if the package is
being sent to other countries, the delivery note must be placed inside a delivery
note pocket and attached to the outside so that it is clearly visible.
11.4
Disposal
Controller disposal
•
Do not dispose of the device with household waste; it should instead be disposed of in
accordance with the currently applicable national regulations.
Packaging disposal
•
Dispose of packaging materials that are no longer needed (cardboard packaging, pa-
per, bubble wrap sheets, etc.) with household waste in accordance with the currently
applicable national regulations.
11.5
Return for disposal
As an alternative to disposal, you can return the device to Phoenix Contact.
•
Include a note in the packaging indicating that the device should be disposed of.
Please note:
The device must not show evidence of being contaminated by oils, greases etc.
