Phoenix Contact AXC F 1050 User Manual Download Page 62

Page: 62 / 140

AXC F 1050

62 / 140

PHOENIX CONTACT

107709_en_00

If you select the PROFINET device (“Select online device here”) under “Name of station

(Online)”, the PROFINET device found in the network (the online device) receives the IP set-

tings of the configured PROFINET device.

If you select the device (“Select project device here”) under “Name of station (Project)”, the

configured PROFINET device receives the IP settings of the online device found in the net-

work.

•

Select the desired device.

The configured PROFINET device has now been assigned to an online device. The

icon in the “Status” column indicates that the assignment was successful.

Figure 6-17

Successful assignment of the configured PROFINET device to an online

device

Please note:

The PROFINET device is not supplied with a factory preset IP address.

•

When starting up the PROFINET device for the first time, choose the device under

“Name of station (Online)”.

The PROFINET device receives the IP settings of the configured PROFINET device.

Summary of Contents for AXC F 1050













































































































































Search results

Summary of Contents for AXC F 1050

Reviews:

Related manuals for AXC F 1050

Brands by name

Popular brands

Phoenix Contact AXC F 1050, User Manual

Search results

Summary of Contents for AXC F 1050

Reviews:

Related manuals for AXC F 1050

Brands by name

Popular brands