Phoenix Contact AXC F 1050 User Manual Download Page 48

Page: 48 / 140

AXC F 1050

48 / 140

PHOENIX CONTACT

107709_en_00

Starting up with PC Worx Engineer

You must have the PC Worx Engineer software to start up the controller.

6.1

Installing PC Worx Engineer

The software can be downloaded at

phoenixcontact.net/product/1046008

•

Download the software onto your PC.

•

Double-click on the *.exe file to start installation.

•

Follow the instructions of the installation wizard.

6.2

PC Worx Engineer licenses

Once installed, a demo version of PC Worx Engineer is available to you for 30 days. You

can use the demo version once on one PC.

You must register PC Worx Engineer within 30 days to continue using the software. To do

this, proceed as follows:

•

phoenixcontact.net/product/1046008

•

Select the necessary license(s).

Free licenses and licenses for purchase are available. The licenses are linked to the hard-

ware of a PC.

Once you have sent your order, you will receive an email from Phoenix Contact within 48

hours that contains a ticket ID. You need the ticket ID together with your computer footprint

to activate the license.

To register PC Worx Engineer, you must activate the license.

The license is activated via the Phoenix Contact Activation Wizard.

The Phoenix Contact Activation Wizard is available to download at

phoenixcontact.net/product/1046008

(standalone or as a component of

PC Worx Engineer).

•

To activate a license, follow the instructions in the Phoenix Contact Activation Wizard.

Summary of Contents for AXC F 1050













































































































































Search results

Summary of Contents for AXC F 1050

Reviews:

Related manuals for AXC F 1050

Brands by name

Popular brands

Phoenix Contact AXC F 1050, User Manual

Search results

Summary of Contents for AXC F 1050

Reviews:

Related manuals for AXC F 1050

Brands by name

Popular brands