PSI-MODEMSHDSL/SERIAL
1-2
PHOENIX CONTACT
104275_en_c00
1.2
Ordering data
1.3
Technical data
Modem
Description
Type
Order No.
Pcs. / Pkt.
SHDSL permanent line modem
, for point-to-point, line, and star structures
on in-house 2 and 4-wire cables
PSI-MODEMSHDSL/SERIAL
2313669
1
Accessories
Description
Type
Order No.
Pcs. / Pkt.
System power supply unit,
primary-switched
Input voltage range
Nominal output voltage
Nominal output current
45 Hz ... 65 Hz
85 V AC ... 264 V AC
24 V DC ±1%
1.5 A
MINI-SYS-PS-100-240AC/24DC/1.5
2866983
1
DIN rail connector
(2 required)
ME 17,5 TBUS 1,5/ 5-ST-3,81 GN
2709561
1
RJ45 (RJ12/RJ11) attachment plug
with surge protection for analog tele-
communications interfaces. Can alternatively be snapped onto DIN rails.
DT-TELE-RJ45
2882925
1
USB cable
, USB type A/mini-USB type B, 5-pos., 1 m long
PSI-CA-USB A/MINI B/1METER
2313575
1 m
USB cable
, USB type A/mini-USB type B, 5-pos., 3 m long
CABLE-USB/MINI-USB-3,0M
2986135
3 m
RS-232 cable
, for connecting the modem to a
9-pos. device interface, 2 m long
9-pos. D-SUB/9-pos.
D-SUB (socket/socket)
PSM-KA9SUB9/BB/2METER
2799474
2 m
RS-232 cable
, for connecting the modem to a
9-pos. device interface, 0.5 m long
9-pos. D-SUB/9-pos.
D-SUB (socket/socket)
PSM-KA9SUB9/BB/0,5METER
2708520
0.5 m
Adapter cable
for connecting the IB IL RS232 and IB IL RS232-PRO Inline
communication terminals to an interface converter, e.g., modem, COM server,
Bluetooth or fiber optics
PSM-KAD-IL RS232/9SUB/B/0,8M
2319200
0.8 m
Supply
Supply voltage
18 V DC ... 30 V DC via plug-in COMBICON screw terminal block
24 V DC ±5% (alternative or redundant, via DIN rail connector and system
power supply)
5 V DC (configuration only, via mini-USB type B)
Nominal current consumption
< 180 mA at 24 V
LED indicator
VCC (green LED)
–
Steady light: operation
–
Flashing at 1 Hz: supply via USB (for configuration)
Switching outputs
2 x U
Nom
/150 mA (the digital outputs cannot be used for power supply via the
DIN rail connector), short-circuit-proof
SHDSL interface
Connection method
2 x 2-pos. COMBICON plug-in screw terminal block
Type
SHDSL interface according to ITU-T G.991.2.bis
Transmission speed
4-wire operation
2-wire operation
64 kbps ... 30 Mbps (manual setting of the data rate)
384 kbps ... 11.39 Mbps (automatic detection of the data rate)
32 kbps ... 15.3 Mbps (manual setting of the data rate)
192 kbps ... 5.696 Mbps (automatic detection of the data rate)
Transmission length
Over 20 km possible at lower data rates and with good cable quality
Connection data (conductor cross section)
0.2 mm² ... 2.5 mm² (24 - 14 AWG)