PSI-MODEMSHDSL/SERIAL
3-8
PHOENIX CONTACT
104275_en_c00
Settings for selected device
Interface type
: RS-232, RS-422, RS-485 W2
Baud rate
: 110 ... 2,000,000 bps
Parity
: None, Even, Odd, Mark, Space
Stop bits
: 1, 1.5 or 2
Data bits
: 7 or 8
DCE/DTE Switchover (RS-232 only):
Automatic, DCE (device is modem), DTE (device
is PC). For information on DCE/DTE switchover, please refer to "RS-232 interface" on
Termination (RS-485 W2 only)
: the 2-wire bus cable must be terminated at both ends
by a termination resistor (100 ... 200 ohms). When "Termination" is activated, the inte-
grated termination resistor in the PSI-MODEMSHDSL/SERIAL is enabled.
You can set the configuration individually for each modem. If the configuration is the same
for each modem, click on "Accept settings for all devices".
Configuration >> Point-to-point wizard or Line structure wizard