42
Device and data management
Factory data reset
You can reset your device to its original system state
and delete all data. After a factory data reset, the device
is restored to its default settings—the way it was when
you first purchased it and turned it on. Any apps you
installed, data you added and settings you customized
on your device will be lost. Also the firmware will be set
to its factory state and needs to be updated again.
Caution
• Performing a factory data reset will delete all data on
your device. Before you perform a factory data reset,
back up any important data saved on your device.
To perform a factory data reset:
1
Tap
Settings
on the Home screen or on the All
Apps screen.
2
Swipe down and tap
Backup & reset
.
3
Tap
Factory data reset
.
X
The Factory data reset window opens.
4
Tap
Reset SpeechAir
.
X
The
Reset
window opens.
5
Tap
Erase everything
.
X
SpeechAir turns off and restarts automatically.
Updating your device
Your device is controlled by an internal program called
firmware. As a part of ongoing product maintenance, the
firmware is upgraded and errors are corrected.
It is possible that a newer version (an ‘update’) of the
firmware has been released since you purchased the
device. In this case, you can easily update your device to
the latest version.
Update your device manually by copying the update
file from our website to your device.
Alternatively,
update the firmware
with the supplied Philips SpeechAir
management software. You can find the software on
the supplied USB flash drive or implemented in Philips
SpeechExec software. For more information, see
Caution
• Before you update the firmware, make sure that your
device has at least 30% battery power left. This helps
to prevent the power supply being interrupted during
the update.
• Before you use other device functions, wait until the
firmware update is complete. Failures in the firmware
update might result in the device’s malfunctioning.
Note
• To find out about new firmware versions, regularly
check our website at
• Before you can use Philips SpeechAir management
software, first install the software. For more
information, see
Update the firmware manually
1
Download the firmware update file
update.img
from the website
to your
computer.
2
Make sure that SpeechAir is turned on and connect
the device to your computer.
3
Copy the firmware update file to the SpeechAir folder
on your computer. You can find the SpeechAir folder
in WIndows Explorer on Windows computers, and in
Finder on Mac computers.
4
Disconnect the device from the computer.
X
The
Update
pop-up window appears on your
SpeechAir.
5
Tap
Update now
. If you want to update the firmware
at a later time, tap
Postpone for 2 hours
. You can
postpone the update three times. Afterwards,
the device will inform you that the firmware will
automatically be updated.
X
SpeechAir turns off and starts the installation of
the update file.
X
You can see the progress of the installation on the
screen.
Summary of Contents for speechair psp1000 series
Page 1: ...User manual Smart voice recorder PSP1000 series SpeechAir ...
Page 54: ...54 Technical data ...
Page 56: ...56 Technical data ...