– 673 –
NWA-008845-001 Rev.5.0
32ch1010.fm
(3) To provide the One Touch key to send “Hooking Called Number” to a Centrex, set the
following data in addition to the programming (2).
(4) To provide the One Touch key to send “Called DTMF Signal” for such as VMS operation,
set the following data in addition to the programming (2), when the called number includes a trunk
access code. If the called number includes no trunk access code, this data is not required.
DESCRIPTION
DATA
Assign the access code for sending of a Hook-
ing signal to a Centrex.
Maximum of two digits are available.
•
(1)
(2)
Y=0-3
X-XXXX: Access code
A158: Hooking signal to a Centrex
Assign a RECALL key on the D
term
. RECALL
key is used to return to a former line.
•
(1)
(2)
Y=00
My Line No. +
+ Key No. (90)
F1015: RECALL
Provide Centrex trunk route with Centrex
function.
•
(1)
(2)
Y=86
00-63: Trunk Route No.
0: Centrex
DESCRIPTION
DATA
Specify whether to set consecutive dialing
“* #” as a delimiter between the called number
and the DTMF signal.
(1)
(2)
448
0 : * # set as dialed digit
1 : Delimiter between called number and
DTMF signal
START
CM20
CM90
,
CM35
END
START
CM08
END
STATION SPEED DIALING
