EN 22
5.
LX7500R
Service hints
SERVICE TOOLS
TORX T10 screwdriver with shaftlength 150mm.....4822 395 50423
TORX screwdriver set SBC 163.............................4822 295 50145
Audio signal disc SBC 429 ....................................4822 397 30184
Playability test disc SBC444..................................4822 397 30245
Test disc 5 (disc without errors) +
Test disc 5A (disc with dropout errors, black spots and fingerprints)
SBC 426/426A ....................................4822 397 30096
Burn in test disc (65 min. 1kHz signal at -30dB level
without "pause")..................................4822 397 30155
DEMO MODE
The DEMO MODE displays various features of the set
and will start automatically when no key has been
pressed for several minutes or during Standby mode.
The Demo mode will automatically be switched off after
the first installation of the set.
The Demo mode can be switched on/off again via the
System Menu of the set:
Press
System Menu on the remote control.
Select
A
→
w
→
Standby
→
Low power
Normal
Demo mode
Sub chassis 8 test disc CD....................................7104 099 28362
MPTD printed test disc CVP02.18A.......................7104 099 91691
MPTD printed test disc CVP02.18C ......................7104 099 97941
Burn in test disc DL LVP04.15...............................7104 099 91041
MPTD thin test disc CVP02.60...............................7104 099 97931
NLT 01.00 link test disc DVDROM settings..........7104 099 98502
Blank DVD+RW disc RICOH ..................................7104 099 98582
Blank DVD+R disc RICOH......................................7104 099 94001
LEAD FREE PRODUCED SET
This set is manufactured with lead-free
production technology. This is also indicated by
the PHILIPS-lead-free logo you find on the
printed boards.
The set is produced with lead-free solder-alloy as well as
with lead-free sub-parts. It can be considered as lead-free.
Due to this fact some rules have to be respected by the
workshop during a repair:
• Use only lead-free soldering-tin Philips SAC305 with order
code 0622 149 00106. If lead-free solder-paste is required,
please contact the manufacturer of your solder-equipment.
• Use only adequate solder tools applicable for lead-free
soldering-tin.
• Adjust your solder tool so that a temperature around 217°
– 220° is reached at the solder joint.
• Do not mix lead-free soldering-tin with leaded soldering-tin.
This would lead to unreliable solder joints.
• On our website http://www.atyourservice.ce.philips.com
you find more information to
– aspects of lead-free technology
– BGA-de-/soldering, heating-profiles of BGAs used in
Philips-sets, and others.