EN 18
4.
LX7500R
Dismantling Instructions
SMPS
picture 19
Dismantling the
Switched Mode Power Supply Board
• Remove 4 screws as shown in picture 16 and loosen the ground
wire from the cabinet.
• Disengage catch of the airguide foils (see picture 17).
• Lift the unit on the rear side and move it backwards to release the
board from the catches on the front side (see picture 18).
• Pull the whole unit on the front side up - take care of cables routed
between front and the plastic foil! - and turn it to service position as
shown in picture 19.
picture 17
picture 18
picture 16