Philips DVDR730/0x, Service Manual

Page: 69 / 160

Diagnostic Software EN 69 DVDR730/0x 5.
Electronic Program Guide Board (EPGB)
PCMCIA INTERFACE (PCMCIA)
Nucleus Name DS_SYS_SettingsDoubleCheck
Nucleus Number 1233
Description This nucleus sets the HW-Id in the HW-diversity string
User Input - <HW-ID> - The hardware ID to set
-No input - The user will be asked for the ID
Example DS:> 1232
Enter the new HW ID of the digital board (Currently equals 21)
Enter a value between 0 and 99:
> 22
The HW ID will be set to: 22. Is that correct? ([Y/N]):y
123200:
Test OK @
DS:> 1232
Enter the new HW ID of the digital board (Currently equals 22)
Enter a value between 0 and 99:
>
The HW ID will be set to: 0. Is that correct? ([Y/N]):N
123202: Setting the HW ID was aborted by the user.
Error @
DS:> 1232 99
123200:
Test OK @
Nucleus Name DS_EPGB_VersionGet
Nucleus Number 1300
Description Returns the version of the EPG board.
User Input None
Example DS:> 1300
130000:
Version : 6.1.9
Test OK @
Nucleus Name DS_PCMCIA_Reset
Nucleus Number 1400
Description Reset the PCMCIA device by sending a reset command through IDE
Example DS:> 1400
140000:
Test OK @
Nucleus Name DS_PCMCIA_Inquiry
Nucleus Number 1401
Description Get the vendor- and product identification and the product revision level of the media
in the slot.
Example DS:> 1401
140100:
Test OK @
Nucleus Name DS_PCMCIA_WriteRead
Nucleus Number 1402
Description Perform a Write Read test to a random sector on the inserted medium in the
PCMCIA device and check if the data read is equal to the data written.
Example DS:> 1402
140200:
Test OK @
Nucleus Name DS_PCMCIA_Diagnostics
Nucleus Number 1403
Description Shall perform the internal diagnostic tests implemented by the PCMCIA slot. The
electronics of the PCMCIA slot are tested here, not the inserted medium.
Example DS:> 1403
140300:
Test OK @