Philips DVDR730/0x, Service Manual

Page: 39 / 160

Mechanical Instructions EN 39 DVDR730/0x 4.
4.1.3 Digital Board
– Unplug the IDE cable that connects to the card reader (1),
see picture 4-8
– Remove the 2 screws (2) that fix the card reader
– Remove the card reader PCB (3)
– Remove the 3 screws (4) that fix the bracket of the card
reader, see picture 4-9.
– Remove the 4 screws (5) that fix the Digital Board, see
picture 4-10, and turn the Digital Board to the required
service position, see picture 4-11
Figure 4-8
Figure 4-9
Figure 4-10
Figure 4-11
4.1.4 Basic Engine
– Remove the tray, see picture 4-2
– Remove the 4 screws that fix the drive, see picture 4-12
Figure 4-12
4.1.5 Analog Board
– Remove the 3 screws (1) that fix the back plate to the
bottom plate, see picture 4-13
– Remove the 4 screws (2) that fix the Analog Board to the
bottom plate
– Remove the Fan assy by releasing the fixing screw (3)
– Remove screw safety holder (4)
– Unlock the two snaps hooks at the left and right (5), see
picture 4-14, and pull the board and backplate out gently
(6)
– Turn the PCB in the service position (7), see picture 4-15
Figure 4-13
1
2
2
3
1
4
4
4
5
5
5
5
1
1
1
2
2
2
2
3
4